 |
| Quantity: | |
|---|---|
Changan’s 500×500mm square SMC composite cover is designed for access to small inspection wells in residential and courtyard settings. The published design includes an anti-slip cross texture and dual handle holes. The current page lists a recommended load of up to 8T and an approximate product weight of 15kg. Confirm the well opening, frame dimensions and required load rating before ordering.
This square inspection cover is made from glass fiber reinforced SMC/FRP composite material. Changan presents it for small utility inspection wells in residential communities, courtyards and nearby service areas.
The anti-slip cross texture and dual handle holes are part of the product design described on the current page. Size, surface texture and logo requirements can be discussed for projects that need a specific configuration.
Parameter | Information published on this page |
|---|---|
Product size | 500 × 500 mm square |
Material | Glass fiber reinforced SMC/FRP composite |
Recommended load | Up to 8T |
Approximate product weight | 15 kg |
Surface | Anti-slip cross texture |
Access features | Dual handle holes |
Described applications | Residential and courtyard inspection wells |
The page does not state that 500 × 500 mm is the clear opening. Confirm the cover and frame drawing, weight basis and applicable load test documentation for the selected product.
The current product page describes this cover for small inspection wells in residential communities, courtyards and similar service areas. It also mentions pedestrians and small maintenance equipment in its load guidance.
The published “up to 8T” figure does not identify a load class or test method. Provide the installation position and expected traffic when requesting a recommendation, especially if equipment or vehicles may cross the cover.
SMC composite material: Glass fiber reinforced material specified for this cover.
Anti-slip surface: Cross texture described in the current product specification.
Inspection access: Two handle holes are included in the published design.
Project customization: Size, surface texture and logo requirements can be discussed with Changan.
Measure the well opening and existing support frame, then provide the installation location, required load rating, quantity and any customization requirements. A drawing or photograph will help confirm whether this 500×500mm product fits the project.
Browse the inspection manhole cover range, or compare the 600×600mm square SMC composite cover if a larger square cover is needed.
The current page lists 500×500mm as the product size but does not specify the clear opening. Request the cover and frame drawing to check the fit.
The page states a recommended load of up to 8T. It does not name a load class or test method, so confirm the supporting test documentation and suitability for the installation position.
The current page mentions small maintenance equipment. Provide its expected load and the installation conditions so the appropriate product configuration can be confirmed.
The current page lists an approximate weight of 15kg. Confirm whether this refers to the cover alone or the cover and frame together.
The current page offers size and logo customization for discussion. Send your drawing and artwork so the available options can be checked.
Send the well opening and frame dimensions, installation location, required load rating, quantity and any logo or surface requirements.
